HP HP-UX 10.20 User Manual

Chapter 3 31
Installation
Installing the hardware and software
installed in the Core I/O card and the HSC Expansion I/O card.
Step 15. Reinstall the Core I/O or HSC Expansion I/O card. If you are reinstalling
the Core I/O card, position the card so that the SpeedCard is on the right
side. If you are reinstalling the Expansion I/O card, position the card so
that the SpeedCard is on the left side.
Step 16. Align the Core I/O or Expansion I/O card with the runners in its slot and
gently push the card back into the system. Carefully use the runners in
the slot to guide it.
HSC Connector
Front of Core I/O Card

HP HP-UX 10.20 Specifications

General

Brand	HP
Model	HP-UX 10.20
Category	Computer Hardware
Language	English