HP Integrity BL860c - Server Blade Subsystem Components; Power, Processor, and Controls Overview

13. Go to the next section (“Additional Configuration Topics” (page 28)) for links to Microsoft
documentation regarding cluster configuration.
14. Go to the next section (“Troubleshooting the Cluster” (page 29)) for information about
troubleshooting problems with your failover cluster.
Gathering Required Installation Information
Use Table 2-1 to record the input parameters you will need to install and configure the cluster.
Record the information in the Value column next to each description.
Table 2-1 Installation and Configuration Input
Input ValueInput Description
Node 2:Node 1:Node names
(Microsoft Windows Server
2008 supports up to eight
nodes per cluster)
Node 4:Node 3:
Node 6:Node 5:
Node 8:Node 7:
Domain name:Domain name, DNS IP
address, and subnet mask for
the domain controller:
DNS IP:
Domain controller subnet mask:
Cluster name:Cluster management
network name and IP
address:
Cluster IP:
Node 1 team:Node 1 Public-1:Public network connection
IP addresses and team IP
address for each node:
Node 1 Public-2:
Node 2 team:Node 2 Public-1:
Node 2 Public-2:
Node 3 team:Node 3 Public-1:
Node 3 Public-2:
Node 4 team:Node 4 Public-1:
Node 4 Public-2:
Node 5 team:Node 5 Public-1:
Node 5 Public-2:
Node 6 team:Node 6 Public-1:
Node 6 Public-2:
Node 7 team:Node 7 Public-1:
Node 7 Public-2:
Node 8 team:Node 8 Public-1:
Node 8 Public-2:
Gathering Required Installation Information 19