6. Create the cluster.
a. From the Failover Cluster Management tool, select Create a Cluster.
b. Enter a Cluster Name (for example: Hetcluster, Pavcluster, Japcluster, Refcluster). Only
select the public network (with a check mark), and then assign a unique IP address for
the cluster. Finally, click Next to create the cluster.
Figure 2-8 Create Cluster Wizard window
c. After the cluster is created, make sure that the Public and Private networks are available,
and that all shared storage disks are visible in the Failover Cluster Management tool.
Figure 2-9 Failover Cluster Management window
Installing the Cluster 25
To Next Page
Loading...
