3. Restart your server.
4. If you are prompted to press a key to start the server from CD, press the appropriate key.
5. If you have a separate driver file, use the driver as part of Setup by pressing F6 when
prompted.
6. When prompted at the beginning of the text-only mode section of Windows Setup, press
F2.
Figure 1-2 Windows Setup screen
7. When prompted, insert the ASR diskette and follow the directions on the screen.
Figure 1-3 Windows Setup screen
Windows Setup proceeds to format the C: drive. Setup then installs a minimal operating system
on the C: drive and restores information stored on the back up target device. If you backed up
Automatic System Recovery (ASR) 21
To Next Page
Loading...
