Need help?Do you have a question about the HP Integrity Superdome SX1000 and is the answer not in the manual?
General| Manufacturer | HP |
|---|---|
| Model | Integrity Superdome SX1000 |
| Category | Server |
| Processor | Intel Itanium 2 |
| Maximum Processors | 64 |
| Memory Capacity | 2 TB |
| Form Factor | Rack-mountable |
| Hot-Plug Components | Yes |
| Operating System | HP-UX |
| Partitioning | Virtual Partitions (vPars) |
| Power Supply | Redundant, hot-plug |
Explains the function and architecture of the cell board, the core processing unit.
Steps to prepare and set up the system after unpacking and inspection.
Guides on connecting the Management Processor to the customer's network.
Instructions for powering on, booting, and verifying the system's functionality.
Explains the necessary grounding methods for Superdome servers.
Provides measures to prevent ESD damage to components during installation and servicing.
Describes the process and forms for evaluating the computer facility before installation.
Details how to configure system boot options for nPartition-capable servers.
Provides methods for booting the HP-UX operating system in various modes.
Instructions for booting the Windows Server 2003 OS on HP Integrity servers.
Steps for booting Red Hat Linux on HP Integrity servers using EFI Shell.
Procedures for gracefully shutting down the HP-UX operating system.
General procedures for shutting down the system, including checking configuration.
Ensures all partitions are ready for shutdown by bringing them to Boot Is Blocked (BIB).
Step-by-step guide to powering off a cell board using the 'pe' command.
Procedures for turning on the housekeeping power supply.
Guidelines for populating memory evenly across memory busses for optimal performance.
To Next Page
