Appendix F
Management Processor Commands
MP Command: DI
252
MP Command: DI
DI - Disconnect Remote or LAN Console
• Access level—Operator
• Scope—Complex
This command initiates separate remote console or LAN console disconnect sequences. For the remote
console, the modem control lines are de-asserted, forcing the modem to hang up the telephone line. For the
LAN console, the telnet connection is closed.
If the console being disconnected has an access mode of single connection (see ER command), then it is
disabled, otherwise it remains enabled after the connection has been dropped.
The number after the LAN console status is the number of LAN connections.
Example F-9 DI Command
To Next Page
Loading...
