Appendix G
JUST Exploration Tool
Jet Set-Up Utility (for PC SMS Only)
276
Jet Set-Up Utility (for PC SMS Only)
To run JET on the installed server from the PC-based SMS, the JET utility must first be run so that JET the
can recognize the server’s IP address.
Step 1. From the Start menu, select RUN.
Step 2. Enter the path to the JET utility. The following window appears:
Figure G-1 JET Set-UP Utility
Step 3. Select Add. The following window appears:
Figure G-2 JET Complex Update Window
Step 4. Enter the server name and IP address and click OK. The server name is recorded in the initial
utility window (Figure G-1).
Step 5. Click Save & Exit to store the server for the utility.
To Next Page
Loading...
