HP Integrity Superdome SX1000 - I;O Expansion Cabinet Power Cords

Chapter 4
System Specifications
Electrical Specifications
123
I/O Expansion Cabinet Power Cords
Table 4-12 lists the power cords for the I/O expansion cabinet.
Table 4-10 I/O Expansion Cabinet Power Requirements (without Support
Management Station)
Requirements Value
Nominal input voltage 200/208/220/230/240 (VAC rms)
Input voltage range (minimum-maximum) 200-240 (VAC rms)
Frequency range (minimum-maximum) 50/60 (Hz)
Number of phases 1
Marked Electrical input current 16A
Maximum inrush current 60 max (A peak)
Power factor correction 0.95 minimum
Table 4-11 I/O Expansion Cabinet Component Power Requirements
Power Required (50 - 60 Hz) VA
Fully configured cabinet 3200
I/O cardcage 500
ICE 600
Table 4-12 I/O Expansion Cabinet AC Power Cords
Part Number
A5499AZ
Where Used Connector Type
-001 North America L6-20
-002 International IEC 309