Appendix C
EFI Boot Maintenance Manager for hp Integrity Superdome
Set Auto Boot Timeout
220
Set Auto Boot Timeout
The “Set Auto Boot Timeout” option specifies a timeout value until the next auto boot. Figure C-5 shows an
example of the selections available for this option. To change the timeout value, highlight the “Set Timeout
Value” selection using the arrow keys and press enter.
Figure C-5 Auto Boot Timeout
The value, in seconds, may be any integer up to 65535. If the value 0 is specified, there is no wait to boot. To
disable the use of the timeout variable, the following three choices are available:
1. Using the “Delete/Disable Timeout” menu option for delete the timeout variable
2. Setting the timeout value to 65535
3. Pressing a key when EFI is booting disables the timeout count down.
To Next Page
Loading...
