Appendix B
Powering On and Off the System
Shutting Down the System
203
Step 8. From the VFP, enter s to select the whole system or the partition number to select a particular
partition. An output similar to that shown in Figure B-6 should be observed.
Figure B-6 Example of Partition State
Step 9. Enter ctrl-B to exit the Virtual Front Panel and bring up the Main Menu.
Shutting Down the Operating System
The operating system on each partition must be shut down. From the Main Menu prompt, enter co to bring
up the Partition Consoles Menu. The menu is shown in Figure B-7.
Figure B-7 Partition Consoles Menu
For each partition, perform the following steps:
Step 1. Enter the partition number at the prompt.
Step 2. Log onto the console:
• HP-UX: Login as root
• Linux: Login as root
To Next Page
Loading...
