User’s Guide 9–1
9
Troubleshooting
Common Problems
Use the following suggestions to troubleshoot problems with the
iPAQ Pocket PC.
Problem Solution
I cannot see
anything on the
screen.
• Be sure the iPAQ Pocket PC is powered on.
• Be sure the iPAQ Pocket PC is connected to the AC
Adapter and the USB Synchronization Cable.
• Reset the device by using the stylus to lightly press the
reset button on the back of the unit.
I cannot keep my
battery charged.
• Always keep the iPAQ Pocket PC connected to the AC
adapter when you are not using it.
• In the backlight settings, adjust the bar to a lower level to
conserve the more battery power.
The backlight
keeps turning
off.
• In Backlight Settings, increase the amount of time the
backlight stays on if not in use.
• Select the option to turn on the backlight when you touch
the screen or push a button
To Next Page
Loading...
