6–2 User’s Guide
Expansion Cards
Installing an Expansion Card
To install a Secure Digital (SD) card into an expansion slot on the
iPAQ Pocket PC:
1. Locate the slot on the top of the iPAQ Pocket PC.
2. Remove the protective plastic card.
3. Insert the expansion card into the expansion slot and push the
connection edge of the card firmly into the expansion slot.
4. To prevent power loss, remove any expansion cards from the
SDIO expansion slot before turning off the iPAQ Pocket PC.
Leaving in the expansion card can drain the unit.
✎
If your expansion card is not recognized, follow the card
manufacturer’s instructions to install it.
✎
For more detailed help, from the Start menu, tap Help >
Connections.
To Next Page
Loading...
