6–4 Reference Guide
Expansion Cards
Remove the 802.11 card
1. Close all applications using the 802.11 card.
2. Push the eject button.
3. Pull the 802.11 card from the expansion pack.
Find information
You can locate information about 802.11 cards at:
www.compaq.com/products/handhelds/pocketpc/pccardlist.shtml
Use the Optional Modem Card
Use an optional modem card to connect your iPAQ Pocket PC to
the Internet or a network, but you must connect with a cable
rather than through a wireless connection.
Install the modem card
1. Install the Single-Slot or Dual-Slot PC Card Expansion Pack.
2. Insert the modem card into the Single-Slot or Dual-Slot PC
Card Expansion Pack. Push the connection edge of the card
firmly into the expansion pack slot.
✎
If your modem card is not recognized, follow the manufacturer’s
instructions to install the driver.
253194-002.book Page 4 Monday, March 4, 2002 10:11 AM
To Next Page
Loading...
