6–6 Reference Guide
Expansion Cards
Install the CF card
Ä
CAUTION: We recommend that you connect your iPAQ Pocket PC
to the AC adapter when installing the expansion pack.
1. Install the CompactFlash (CF) Card Expansion Pack.
2. Insert a CF card into the CF Card Expansion Pack. Push
the connection edge of the card firmly into the expansion
pack slot.
Remove the CF card
1. Close all applications using the CompactFlash (CF) card.
2. Pull the CF card from the expansion pack.
Find information
You can locate information about CF cards at:
www.compaq.com/products/handhelds/pocketpc/cfcardlist.shtml
Use Optional Secure Digital Memory Card
You can use an optional Secure Digital (SD) memory card to
increase the memory capacity of your iPAQ Pocket PC.
Ä
CAUTION: Install the SD card only into the SD slot on the iPAQ
Pocket PC. You cannot install this card into a Single-Slot or
Dual-Slot PC Card Expansion Pack or a CompactFlash Card
Expansion Pack.
253194-002.book Page 6 Monday, March 4, 2002 10:11 AM
To Next Page
Loading...
Need help?
General
