7–6 Reference Guide
Troubleshooting
I cannot
establish a
connection.
■ Make sure your card is properly inserted into the
memory slot on your expansion pack.
■ Follow the manufacturer’s instructions to install the
driver.
My iPAQ
Pocket PC
cannot
recognize my
card.
Perform a soft reset of your iPAQ Pocket PC by inserting the
stylus into the unit reset switch at the bottom of your iPAQ
Pocket PC, then pressing the switch for one second.
The symptom
or situation
is... A possible remedy is...
253194-002.book Page 6 Monday, March 4, 2002 10:11 AM
To Next Page
Loading...
