2–18 Reference Guide
Communicating
■ An Ethernet hub or a crossover cable to plug in your
iPAQ Pocket PC
■ A Single-Slot or Dual-Slot PC Card Expansion Pack or a
CompactFlash (CF) Card Expansion Pack
1. Insert your Ethernet/LAN card into your iPAQ Pocket PC.
If your Ethernet/LAN card is not recognized, follow your
Ethernet card manufacturer’s instructions to install the
Ethernet card driver.
2. Do one of the following:
If you are using a DHCP server, the network settings should
be entered for you automatically.
If you are not using a DHCP server, enter your network
settings.
a. From the Start menu, tap Settings.
253194-002.book Page 18 Monday, March 4, 2002 10:11 AM
To Next Page
Loading...
