To Next Page

To Previous Page

To charge the Headset:

1. Connect the retractable USB cable into the car charger or

any USB computer, and then plug the other end to the

charging base.

2. Place the Headset into the charging base.

3. During charging, the red indicator light on the charging

base illuminates.

4. When the battery is fully charged, the indicator light on the

charger turns green.

5. You can now remove the Headset from the charging base.

During charging, if an incoming call arrives while the Headset

is switched on, you can answer the call simply by removing the

Headset from the charging base.

HP iPAQ User Manual

Other manuals for HP iPAQ