To Next Page

To Previous Page

Syntax:

show ip igmp groups

Shows VLAN-ID, uptime, expiration time, multicast filter type.

Output:

IGMP Group Address Information

VLAN ID Group Address Expires UpTime Last Reporter | Type

------- ------------- --------- -------- --------------- + -----

Syntax:

show ip igmp config

Shows IGMP configuration information.

Output:

IGMP Service Config

Control unknown multicast [Yes] : Yes

Forced fast leave timeout [0] : 4

Delayed flush timeout [0] : 0

VLAN ID VLAN Name IGMP Enabled Querier Allowed Querier Interval

------- ------------ ------------ --------------- ----------------

1 DEFAULT_VLAN No Yes 125

Syntax:

show ip igmp statistics

Shows IGMP statistical information.

Output:

Total VLANs with IGMP enabled : 0

Current count of multicast groups joined : 0

IGMP Joined Groups Statistics

VLAN ID VLAN Name Total Filtered Standard Static

------- -------------------------------- ------ -------- -------- ------

1 DEFAULT_VLAN 0 0 0 0

Syntax:

show ip igmp vlan <ID>

Usage:

show ip igmp [config|group IP-ADDR|groups vlan

<VLAN-ID>|statistics|VLAN-

Invoked without any parameters, shows per-VLAN IGMP status, or, if VLANs are

disabled displays the global IGMP status.

When followed by the config keyword, shows IGMP global configuration

information.

When followed by statistics keyword shows igmp statistical information.

VLAN-ID can be used to get operational, statistical, and configuration information

for a particular VLAN (if VLAN support is enabled).

Help function commands 33

Questions and Answers:

Need help?

Do you have a question about the HP J9729A and is the answer not in the manual?

HP J9729A Specifications

General