HP J9979A Installation And Getting Started Guide

2-7
Installing the Switch
Installation Procedure
Note The HP 1820 24- and 48-port switches do not have a power switch. They are
powered on when the power cord is connected to the switch and to a power
source. For safety, the power outlet should be located near the switch
installation.
The switches automatically adjusts to any voltage between 100-127 or 200-240
volts and either 50 or 60 Hz. There are no voltage range settings required.
Connect the power cord to the switch
and an AC power outlet
HP 1820-8G Switch
HP 1820 24- and 48-Port Switches
Connect wall plug-in AC/DC power adapter
to the switch and an AC power outlet
HP 1820-8G-PoE+ Switch
Connect inline AC/DC power adapter to the
switch and an AC power outlet

HP J9979A Specifications

General

Model	J9979A
Category	Switch
Layer	Layer 2
Jumbo Frame Support	Yes
Input Voltage	100 - 240 VAC
Uplink Ports	4
Management	Web, SNMP
Dimensions	44.25 x 30.0 x 4.4 cm
Weight	4.4 kg
Power Supply	Internal
Form Factor	Rack-mountable
Operating Temperature	0°C to 45°C
Operating Humidity	15% to 95% (non-condensing)
Ports	24 x 10/100/1000 ports