12-4
Maintenance Pages
Backup and Update Manager
Figure 12-6.TFTP Update File Page
To update a file using TFTP, configure the following information and click Begin Transfer.
Table 12-4.TFTP Update File Fields
Caution Do not disturb the browser window while the transfer is in progress.
Digital Signature Verification For the Backup Code and Configuration file types, you can select this option to have
the switch verify the file download with a digital signature.
Digital signature verification is applied to backup code only—not to configuration
files.
Status Status information on the update process.
Field Description
Field Description
File Type See the options in Table 12-3 on page 12-3.
Server Address Enter the IP address or host name of the TFTP server.
File Name Enter the path on the server where file is located followed by the filename.
The path can be 0 to 160 characters and the file name can be 1 to 32 characters. The
path and file name are separated by a slash (/).
The file name can have ASCII printable characters, excluding the following:
\, /, :, *, ?, ", <, >, |
Digital Signature Verification For the active and backup code file types, you can select this option to have the switch
verify the file download with a digital signature.
Status Status information on the update process.
To Next Page
Loading...
Need help?
General
