HP JG640A - Page 8

Note 2 Localization required on orders without #B2B, #B2C or #B2E options.
Note 3 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered
only in NA, Mexico,, Taiwan, and Japan)
Note 6 The following Transceivers install into this Switch:
JD092B - HP X130 10G SFP+ LC SR Transceiver
JD093B - HP X130 10G SFP+ LC LRM Transceiver
JD094B - HP X130 10G SFP+ LC LR Transceiver
JG234A - HP X130 10G SFP+ LC ER 40km Transceiver
Note 7 The following Transceivers install into this Switch:
JD102B - HP X115 100M SFP LC FX Transceiver
JD120B - HP X110 100M SFP LC LX Transceiver
JD090A - HP X110 100M SFP LC LH40 Transceiver
JD118B - HP X120 1G SFP LC SX Transceiver
JD119B - HP X120 1G SFP LC LX Transceiver
JD061A - HP X125 1G SFP LC LH40 1310nm XCVR
JD062A - HP X120 1G SFP LC LH40 1550nm XCVR
JD063B - HP X125 1G SFP LC LH70 Transceiver
Remarks:
The TAA skus in the 800 Unified Wired-WLAN Switches are US available only.
Box Level CTO Models
CTO Solution Sku
HP 830 CTO Unifd Wrd-WLAN Swch Solution JG662A
SSP trigger sku
CTO Switch Chassis
HP 830 8P PoE+ Unifd Wired-WLAN Swch JG641A
8 RJ-45 dual-personality 10/100/1000 ports
2 SFP 1000 Mbps ports (Min 0 / Max 2)
1 RJ-45 serial console port
See Configuration
Note:1, 2, 3, 4
PDU CABLE NA/MEX/TW/JP JG641A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU CABLE ROW JG641A#B2C
C15 PDU Jumper Cord (ROW)
220 NA JG641A#B2E
NEMA L6-20P Cord
QuickSpecs
HP 830 Unified Wired-WLAN Switch Series
Configuration
DA - 14560 Worldwide — Version 8 — June 10, 2014 Page 8