HP KBRF7171 - User Manual

Page 1 of 4
2.4G Wireless Keyboard USRE MANUAL
KBRF7171
User’s Quick Guide
This guide will take you through all the functions of the Keyboard and explain how to configure them using the
Keyboard.
Introduction
Congratulations on your purchase of the HP 2.4G Wireless Keyboard
Model: KBRF7171
Package Contents
• Wireless Keyboard x 1
• USB Adaptor ( to operate in coordination for Dongle model : MORFDIUOA-D )
• AAA Battery x 2
• User’s Guide x 1
PC Requirements
• Pentium processor or equivalent
Operating System: Windows
®
XP with Service Pack 1 or higher, Windows
®
Vista.
Setup 2.4G Wireless Keyboard
• Please take off the battery cover and then put 2 AAA alkaline batteries in the battery compartment. Please
note batteries are fitting with correct electrode that shows on the inner side of battery cover.
• Plug in adaptor to computer USB port.
• Press “ Connect “ button to Setup the Keyboard and Adapter ( Dongle ) connection .
USB adaptor and Keyboard will automatically connection after Adaptor plug into PC after few seconds.

Summary

Introduction

Package Contents

PC Requirements

Setup 2.4 G Wireless Keyboard

Troubleshooting

Keyboard Not Working

Troubleshooting steps for when the keyboard is not functioning correctly.

Keyboard Pointer Not Moving

Troubleshooting steps for when the keyboard pointer fails to move.

Battery Notice

Important safety and operational notes regarding battery replacement.

FCC Statement

CE Statement

IC Statement

HP KBRF7171 Specifications