Icon Main Menu Submenu Description
Depending on monitor model, factory default is On or
Off.
Power-On Status
Display
Displays the operating status of the monitor each time
the monitor is powered on. Select the location to
display the status to:
●
Top
●
Middle
●
Bottom
●
Off
The factory default is Top.
DDC/CI Support Allows the computer to control some OSD menu
features such as brightness, contrast and color
temperature. Set to:
●
On
●
Off
The factory default is On.
Bezel Power LED Turns off the power LED on the front panel of the
monitor. The factory default is On.
Sleep Timer Provides the timer adjustment menu options:
●
Set Current Time—sets the current time in hours
and minutes
●
Set Sleep Time—sets the time you want to place
the monitor in sleep mode
●
Set on Time—sets the time you want the monitor
to wake up from sleep mode
●
Timer—sets the Sleep Timer feature On or Off.
The default setting is Off.
●
Sleep Now—immediately sets the monitor to
enter sleep mode
Video Input
Control (select
models)
Selects the video input signal. DVI is the factory
default.
Switch Video Input Selects the other (VGA or DVI) video input signal.
Default is DVI.
Auto-Switch Input Turns the system's automatic video signal input to on
or off. The factory default is On.
Default Video Input Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The default input selection is DVI.
Analog — VGA — Selects VGA input.
Table 4-2 OSD Menu (continued)
28 Chapter 4 Operating the Monitor
To Next Page
Loading...
Need help?
General
Weight and Dimensions
