To Next Page

To Previous Page

Icon Main Menu Submenu Description

Digital — DVI — Selects DVI input.

Information Selects and displays important information about the

monitor.

Current Settings Provides the current input video mode.

Recommended

Settings

Provides the recommended resolution mode and

refresh rate for the monitor.

Serial Number Reports the serial number of the monitor. The serial

number is needed if contacting HP technical support.

Version Reports the firmware version of the monitor.

Backlight Hours Reports the total hours of backlight operation.

Service Support: http://

www.hp.com/support

Factory Reset Returns all OSD menu settings and DDC/CI controls

to the factory default settings, except the Language.

Exit Exits the OSD menu screen.

Table 4-2 OSD Menu (continued)

Adjusting the Monitor Settings 29

Other manuals for HP L1750

Questions and Answers:

Need help?

Do you have a question about the HP L1750 and is the answer not in the manual?

General

3D	No
Aspect ratio	16:9
Display diagonal	17 \
Display resolution	1280 x 1024 pixels
Vertical scan range	50 - 77 Hz
Horizontal scan range	24 - 83 kHz
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	-
Contrast ratio (typical)	800:1
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1280 x 1024 (SXGA)
On/off switch	Yes
Power consumption (standby)	- W
USB Type-A downstream ports quantity	0
Tilt angle range	-5 - 35 °
Panel mounting interface	- mm
Product color	Silver
Country of origin	China
Cables included	AC
Sustainability certificates	ENERGY STAR