EasyManuals Logo

HP L2335 User Manual

HP L2335
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
A–2 www.hp.com User’s Guide
Troubleshooting
Using the Worldwide Web
Before contacting customer services, refer to the support Web site
at:
http://www.hp.com/support
Image appears
blurred, indistinct, or
too dark.
Brightness and contrast
are too low.
Press the Menu button to
open the OSD Menu, and
adjust the brightness and
contrast scales as needed.
Image is not
centered.
Position may need
adjustment.
Press the Menu button to
access the OSD menu.
Select Image Control to
adjust the horizontal or
vertical position of the
image.
“Check Video
Cable” is displayed
on screen.
Monitor video cable is
disconnected.
Connect the 15-pin monitor
video cable to the VGA
connector on the computer.
Be sure that the computer
power is off while
connecting the video cable.
“Input Signal Out of
Range” is displayed
on screen.
Video resolution and/or
refresh rate are set
higher than what your
monitor supports.
Restart your computer and
enter Windows Safe Mode
by pressing the F8 Function
key when the computer starts
to boot up. Change your
settings to a supported
setting. Restart your
computer so that the new
settings take effect.
Problem Possible Cause Solution

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP L2335 and is the answer not in the manual?

HP L2335 Specifications

General IconGeneral
3DNo
Pixel pitch0.258 x 0.258 mm
Aspect ratio16:9
Response time16 ms
Display diagonal23 \
Display resolution1920 x 1200 pixels
Contrast ratio (dynamic)-
Display number of colors16.78 million colors
Viewing angle, horizontal170 °
Digital vertical frequency48 - 85 Hz
Digital horizontal frequency30 - 94 kHz
Display brightness (typical)250 cd/m²
Supported graphics resolutions1152 x 870, 1920 x 1200 (WUXGA)
DVI-D ports quantity0
LED indicatorsPower
Tilt angle range-5 - 25 °
Height adjustment90 mm
Cable lock slot typeKensington
On Screen Display (OSD)Yes
Panel mounting interface100 x 100 mm
AC input frequency50 - 60 Hz
Power consumption (typical)100 W
Power requirements90 - 265V
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationACA, CSA, CE, CCIB/CCEE, CISPR, FCC, TUV/GS, VDT, NOM, MIC, MPR-II, PC2001, PC99, BSMI, TCO, TUV-Ergo, UL, VCCI
Country of originChina
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)85 mm
Width (without stand)545 mm
Height (without stand)370 mm
Weight (without stand)10100 g

Related product manuals