HP LaserJet 3015 - Page 31

Category Specification
First line/leading edge skew:
the distance of the first scan line
from the leading edge of the
media.
4.23 mm (0.16 inch) ± 2.0 mm (0.07 inch) for cut-sheet media.
4.23 mm (0.16 inch) ± 2.5 mm (0.09 inch) for thick media over
105-g/m
2
(28 pounds).
15.0 mm (0.59 inch) ± 3.5 mm (0.13 inch) for envelopes and
postcards.
Left margin: the distance of the
left-most vertical line (first two
dots of each scan line) from the
left edge of the media.
4.23 mm (0.16 inch) ± 2.0 mm (0.07 inch) for cut-sheet media.
15.0 mm (0.59 inch) ± 3.5 mm (0.13 inch) for envelopes and
postcards.
Parallelism All vertical lines must be parallel within an absolute value of 2
percent (1.5 mm [0.05 inch] over a 250 mm [9.85 inch] length for
cut-sheet media).
HP LaserJet 3030 fax capabilities
Table 1-8. HP LaserJet 3030 fax capabilities
Category Specification
Fax transmission speed
3 seconds/page (ITU-T Test Image #1)
Right/left margins for printed
pages
6.3 mm (0.25 inch)
Top/bottom margins for printed
pages
5.08 mm (0.2 inch)
Fax compatibility ITU Group 3; ECM
Fax coding schemes MH, MR, and MMR
Modem speed
Up to 33,600 bits per second (bps)
Speed dialing Yes
Distinctive ring detect Yes
Fax resolution (standard)
203 by 98 dpi
Fax resolution (fine) 203 by 196 dpi
Fax resolution (superfine) 300 by 300 dpi (no halftone)
Fax resolution (photo) 300 by 300 dpi (halftone enabled)
Fax page storage Up to 110 slerexe pages
Table 1-7. Skew specifications (all models) (continued)
ENWW Product specifications 13