HP LaserJet 3015 - Sending a delayed fax

Automatic document feeder (ADF) specifications
HP LaserJet 3015 product
●
Input capacity: The ADF holds up to 30 sheets of flat 16 lb copier-grade paper.
● Media weight: See
HP LaserJet 3015 performance specifications.
● Media size: Use copier-grade paper that is within the following size ranges only:
● Minimum: 74 by 105 mm (2.9 by 4.1 inches)
● Maximum: 215.9 by 356 mm (8.5 by 14 inches)
HP LaserJet 3020 and 3030
● Input capacity: The ADF holds up to 50 sheets of flat 16 lb copier-grade paper.
● Media weight: See
HP LaserJet 3020/3030 performance specifications.
● Media size: Use copier-grade paper that is within the following size ranges only:
● Minimum: 127 by 127 mm (5 by 5 inches)
● Maximum: 215.9 by 381 mm (8.5 by 15 inches)
To gain access to the optimizing feature
You can gain access to the optimizing feature on the Paper tab or the Paper/Quality tab in
the device properties (printer driver).
Note
Printing speeds might vary depending on the type and size of media used.
You might need to change the setting again to optimize for the type of media on which you
normally print.
38 Chapter 2 Operation ENWW