32 Chapter 2 - Installation and operation EN
8 Stop/Clear—stops or clears any action in progress or exits the
Menu settings.
9Scan—starts scanning documents loaded in the document
feeder.
10 Copy—starts the copy function.
11 One-touch keypad—use the keys on the one-touch keypad to
store frequently dialed fax numbers.
12 Fax/Send—use to start sending paper faxes.
13 Volume—use to adjust the line monitor volume for incoming and
outgoing fax connection sounds.
14 Speed-Dial—press this key, plus a one-, two- or three-digit code
to fax to previously stored fax numbers.
15 Redial/Pause—press to redial the last fax number or use to
insert a pause into a fax number.
16 Numeric keys—use to enter fax numbers. Also use to add letters
when typing a name in the fax header or for speed-dials.
17 Reduce/Enlarge—use to adjust the size of the current copy job.
18 Resolution—use to adjust the resolution, or sharpness, for the
current fax or copy job.
19 Contrast—use to adjust the contrast, or difference between light
and dark areas, for the current fax or copy job.
To Next Page
Loading...
