EN Identifying product components 33
Using the control panel menu structure
What follows is a hierarchical diagram of the control panel menu
structure. Refer to this menu structure when you make changes to
settings and features.
To print a copy of the menu structure, see “Internal reports” on
page 181. To see which settings are currently selected, print a
configuration report. See “Internal reports” on page 181 for
instructions. The following is a general procedure for using the control
panel menu.
To use the control panel keys:
1 Press E
NTER/MENU to begin.
2 Use the < or > key to select one of the choices from the main
Menu, and then press E
NTER/MENU.
3 Use the < or > key to select one of the choices from the Submenu
and press E
NTER/MENU.
4 If applicable, use the < or > key to select one of the choices from
the second Submenu and press E
NTER/MENU.
To print the control panel menu structure
1 Press ENTER/MENU.
2 Use the < or > key to select
REPORTS and then press ENTER/
M
ENU.
3 Use the < or > key to select
MENU STRUCTURE and then press
E
NTER/MENU. The product exits the Menu settings and prints the
report.
To Next Page
Loading...
