Removal and Replacement
Rear Assemblies
Lower Output Rollers
There are four-separate output rollers located directly below the
Upper Output Roller Assembly. Each roller is held in place by
three pressure tabs.
@
1. Remove the Printer Cover.
2. Remove the Upper Output Roller Assembly (Figure 6-34).
e
3. Push either the left or right tab inward, tilt the Output Roller
and lift upward to remove (Figure 6-35). Use the same
procedure for all four rollers.
Figure 6-35 Removing the Lower CMpwl Rollers
6-38
To Next Page
Loading...