Installation and Configuration
service Mode (Laserdet 4MLMPMMP)
Setting the Cold Reset Default (LaserJet 4P/4MP)
The default paper size for Formatter PCAS in Europe is A4. When
replacing Formatters whose default is set for A4, set the
Customization Variable to A4. When the Customization Variable is
set to A4, the Cold Reset procedure will always reset the paper size
to A4 (not to Letter).
To set the Customization Variable:
1. Enter the Service Mode as described in this section.
2. Press the - key to access the Service Menu.
3. Press the ~ key to step through the menu until
;-.:;,7
.r:,-,r:_-m-i .:-,-.-:-C;C>,,,.
,-, ~~, ,-.,..l,.L,.L, ,..........
ISdisplayed.
4. Press the ~ key to toggle between Letter and A4 paper.
5. Press the ~ key to save your selection.
6. Press -to return the display to :=ti:..~t’ii tififii:.
7. Press - a second time to exit Service Mode.
Other Service Mode Items
The other Service Menu items, z::!” 2;?!H=: and ~:I:w%:3T I>;= are
included for specialized purposes. If either item needs to be
changed from the default setting (=%...:s;: and :H%,respectively),
the procedure is similar to that used for setting the page count or
Cold Reset default, described above.
3-18
To Next Page
Loading...