ENWW
start guide
13
Step 6. Install print cartridge
1
Open the printer’s top cover.
Remove the print cartridge from its
packaging (save packaging for
possible cartridge storage).
Caution
To prevent damage to the print
cartridge, do not expose it to light for
more than a few minutes.
2
Rotate the cartridge and gently
shake it from side to side to
distribute the toner evenly inside the
cartridge.
3
Locate the sealing tape tab on the
end of the cartridge. Carefully bend
the tab back and forth until it
separates from the cartridge.
Continued on the next page.
To Next Page
Loading...