HP LaserJet 5100 series - Step 13. Test the printer

24 start guide
ENWW
Step 13. Test the printer
Print a configuration page to make sure
the printer is operating correctly.
1
Make sure that the printer is on and
the READY message appears.
2
Press
[Menu]
until the display reads
INFORMATION MENU.
3
Press
[Item]
until the display reads
PRINT CONFIGURATION.
4
Press
[Select]
to print the
configuration page.
5
The configuration page shows the
printer’s current configuration.
Note
A Jetdirect network configuration page
will also print for the HP LaserJet
5100tn and 5100dtn printers.
READY
INFORMATION
MENU
PRINT
CONFIGURATION
PRINT
CONFIGURATION