Q1860-90918 6 Removing and replacing parts 129
Note The transfer roller is held on the right side by a hinged clip (callout 3; also see callout 4 in figure 59).
3 Use the needle-nosed pliers to lift the transfer roller straight up to free the transfer roller from
the hinged clip.
Figure 57. Transfer-roller assembly removal (2 of 3)
4 Free the left side of the transfer roller by lifting it straight up.
5 Remove the transfer roller, being careful not to touch the roller with your fingers.
Figure 58. Transfer-roller assembly removal (3 of 3)
2
3
www.GovTechMedia.com
To Next Page
Loading...
