164 Removing and replacing parts Q1860-90918
Laser/scanner assembly
1 Remove the top cover (see page 115) and the face-down bin cover (page 122).
2 Facing the back of the printer, remove the four screws (callout 1) that hold the assembly to
the chassis.
3 Disconnect three cables (callout 2).
4 Lift the laser/scanner assembly out of the chassis.
Figure 97. Laser/scanner assembly removal (top, inside view of printer)
Note You might have to readjust the top margin after you replace the laser/scanner assembly (see page
132).
2
1
2
2
2
2
www.GovTechMedia.com
To Next Page
Loading...
