Q1860-90918 Chapter 7 Troubleshooting 203
Paper-path test
To perform a paper-path test:
1 Press [M
ENU] until INFORMATION MENU appears
2 Press [I
TEM] until PRINT PAPER PATH TEST appears.
3 Press [S
ELECT].
4 Press [+] to cycle selections until the input tray you want to test appears.
5 Press [S
ELECT].
6 Press [+] until the output bin you want to use appears (open the rear output bin to print to it).
7 Press [S
ELECT].
8 Press [+] until the appropriate duplex mode (on or off) appears.
9 Press [S
ELECT].
10 Press [+] to cycle selections until the appropriate number of copies appears. Choose 1, 10,
50, 100, or 500 copies.
11 Press [S
ELECT] to perform the paper-path test.
www.GovTechMedia.com
To Next Page
Loading...
