62 Printer operation Q1860-90918
Cold reset paper size
The default paper size is stored in NVRAM. When the printer is cold reset, the default paper size
is set to the factory setting. Possible values are
COLD RESET PAPER=LETTER and COLD RESET
PAPER=A4
. When you replace the formatter in countries that use A4 rather than letter size paper,
set the cold reset paper size to
A4.
Diagnostics
This menu item enables or disables the use of the firmware diagnostic features. Possible values
are
DIAGNOSTICS=OFF* and DIAGNOSTICS=ON.
Note For developers only.
Clear event log
Use this item to clear the internal event log.
www.GovTechMedia.com
To Next Page
Loading...
