3. Grasp both sides of the media, and slowly pull the media out. Be careful not to spill loose toner on
yourself or into the printer.
Figure 6-11 Clearing jams from the output-bin areas (3 of 4)
NOTE If media is difficult to remove, open top cover and removing the print cartridge to
release pressure on the media.
4. Close the rear door. The clips automatically return to their original positions.
Figure 6-12 Clearing jams from the output-bin areas (4 of 4)
5. Open and close the top cover to clear the jam message.
If a jam message persists, media is still in the printer. Look for media in other locations.
234 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...