4. Open the CONFIGURE DEVICE menu at the printer control panel. Open the PRINT QUALITY
submenu and change theTONER DENSITY setting. (See
Print Quality submenu on page 268.)
5. Open the CONFIGURE DEVICE menu at the printer control panel. On the PRINT QUALITY
submenu, open OPTIMIZE and set LINE DETAIL=ON.
Blurred print
1. Make sure that the type and quality of the media you are using meet HP specifications. (See
Selecting print media on page 16.)
2. Make sure that the environmental specifications for the printer are being met. (See
Operating-
environment specifications on page 381.)
3. Turn over the stack in the tray. Also, try rotating the stack 180°.
4. Do not use media that already has been run through the printer.
5. Decrease the toner density. Open the CONFIGURE DEVICE menu at the printer control panel.
Open the PRINT QUALITY submenu and change the TONER DENSITY setting. (See
Print Quality
submenu on page 268.)
6. Open the CONFIGURE DEVICE menu at the printer control panel. On the PRINT QUALITY
submenu, open OPTIMIZE and set HIGH TRANSFER=ON. (See
Print Quality submenu
on page 268.)
Random image repetition
248 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...