If an image that appears at the top of the page (in solid black) repeats farther down the page (in a gray
field), the toner might not have been completely erased from the last job.
●
Change the tone (darkness) of the field that the repeated image appears in.
●
Change the order in which the images are printed. For example, have the lighter image at the top
of the page, and the darker image farther down the page.
●
From your software program, rotate the whole page 180° to print the lighter image first.
●
If the defect occurs later in a print job, turn the printer off for 10 minutes, and then turn it on to restart
the print job.
ENWW Troubleshooting print-quality problems 249
To Next Page
Loading...