Paper Feed Frame
1 Remove the Printer Covers.
2 Remove the Pickup Roller Assembly (Figures 6-23 through 6-24).
3 Disconnect the following:
• Solenoid from the DC Controller at J204 (Figure 6-22, callout 1)
• Two connectors from the Laser/Scanner (Figure 6-26, callout 1)
• Connector from Top Cover/EP Cartridge Sensor on HP LaserJet 5L only (Figure
6-26, callout 2)
• Connector from Switch 101 (Figure 6-26, callout 3)
• Connector from Front Control Panel (Figure 6-26, callout 4)
Paper Feed Frame Removal (1 of 4)
Figure 6-26
6 - 30 Removal and Replacement
To Next Page
Loading...