Separation Pad
1 Remove the Printer Covers, Pickup Roller Assembly (Figures 6-23 and 6-24), and
Kick Plate (Figure 6-31).
2 Lift the bottom of the white plastic tab on the rear of the Paper Feed Frame up
slightly and slide it up, toward the top of the Paper Feed Frame. This will release the
Separation Pad (Figure 6-33).
3 Lift the Separation Pad 90 degrees and slide its mounting pins out of their retainers.
Separation Pad Removal
Figure 6-33
6
Removal and
Replacement
Removal and Replacement 6 - 37
To Next Page
Loading...