Cleaning Printer Components
CAUTION
To avoid permanent damage to the toner cartridge, do not use ammonia-based
cleaners on or around the printer. Do not touch the transfer roller with your fingers.
Contaminants on the roller can cause print quality problems.
COMPONENT CLEANING METHOD/NOTES
Outside Covers Use a water-dampened cloth. Do not use solvents or
ammonia-based cleaners.
Inside General Use a dry, lint free cloth. Remove all dust, spilled toner, and
paper particles.
Exit Roller Use a water-dampened lint-free cloth. (For location, see
Figure 6-8.)
Fuser Exit Roller Use a water-dampened lint-free cloth. (For location, see
Figure 6-18.)
Pickup Roller Use a lint-free cloth dampened with isopropyl alcohol. (For
location, see Figure 6-25.)
Pressure Roller Use a dry lint-free cloth. (For location, see Figure 6-16.)
Transfer Roller Use a dry, lint-free cloth. DO NOT TOUCH with your fingers.
(For location, see Figure 6-30.)
Separation Pad Use a dry lint-free cloth. (For location, see Figure 6-31.)
Delivery Assembly Use a water-dampened lint-free cloth. (For location, see
Figure 6-10.)
Static Eliminator Teeth Use compressed air. (See Figure 4-2 on the following page
for static eliminator teeth location.)
Table 4-2 Cleaning Printer Components
4
Maintenance
Printer Maintenance 4-7
To Next Page
Loading...