Menu item Sub-menu item Description
Advanced Color Copy Enables or disables the color copy button.
Lightness The default light/dark setting for copies. Possible values
range from 1 to 11 with 6 being the default (no change) value.
Contrast The default contrast setting for copies. Possible values
range from 1 to 11 with 6 being the default (no change) value.
Sharpen The default sharpen setting for copies. Possible values
range from 1 to 11 with 6 being the default (no change) value.
Background Removal The default background removal setting for copies. Possible
values range from 1 to 11 with 6 being the default (no
change) value.
Color Balance The default color balance setting for copies. Possible values
range from 1 to 11 with 6 being the default (no change) value.
Values can be set for each of the following settings:
●
Red
●
Green
●
Blue
Grayness The default grayness setting for copies. Possible values
range from 1 to 11 with 6 being the default (no change) value.
Restore defaults Sets all customized copy settings to the factory default
values.
Table 2-2 Reports menu
Menu Item Sub-menu item Sub-menu item Description
Demo page Prints a page that demonstrates print quality.
Menu structure Prints a control-panel menu layout map.
Configuration
report
Prints a list of all the product settings. Includes network
information when the product is connected to the network.
Supplies status
page
Prints the print-cartridge status. Includes the following
information:
●
Approximate pages remaining
●
Serial number
●
Number of pages printed
Network report Displays status for:
●
Network hardware configuration
●
Enabled features
●
TCP/IP and SNMP information
●
Network statistics
Usage page Displays the number of pages printed, faxed, copied, and
scanned by the product.
Table 2-1 Copy setup menu (continued)
12 Chapter 2 Control panel ENWW
To Next Page
Loading...