NOTE: You cannot view the HP EWS screens from outside a firewall.
1. Open a supported Web browser.
2. In the Address or Go to field, type the IPv4 or IPv6 TCP/IP address, the host name, or the
configured host name that is assigned to the product. See the following examples.
●
IPv4 TCP/IP address:
http://192.168.1.1
●
IPv6 TCP/IP address:
http://[2001:0ba0:0000:0000:0000:0000:0000:1234]
●
Host name:
npiXXXXXX
If you do not know the TCP/IP address for the product, find it by using the control-panel menu or by
printing a configuration page. For instructions, see the user guide that came with your product.
NOTE: The HP EWS for the device supports IPv6 on the Information, Settings, and Networking
tabs. However, the Digital Sending tab supports only IPv4 address configuration.
ENWW Opening the HP Embedded Web Server 3
To Next Page
Loading...
