Figure 2-3 Configuration Page screen – 2 of 2
6
7
8
9
Table 2-2 Configuration Page
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web
Server on page 4.
2 Device Information Lists the serial number, version numbers, and other information for the
device.
3 Installed Personalities and
Options
Displays information about optional accessories and configurations. The
following information appears:
●
Version and TCP/IP address for all network devices connected to
the product (Jetdirect or internal Jetdirect)
●
All of the printer languages that are installed (such as printer
command language [PCL] and PostScript® [PS])
●
Options that are installed in each DIMM slot and EIO slot
●
USB devices that can be connected to a printer used as a host USB
controller, such as mass storage devices, card swipes, or keypads
4 Color Density Lists the cyan, magenta, yellow, and black (CMYK) values for highlights,
midtones, and shadows.
5 Calibration Information Lists the last color-plane registration (CPR) page count, the last CPR
page-count date, the last page count (in engine cycles) for DMAX/
DHALF, and the last DMAX/DHALF page-count date.
Color plane registration occurs when new print cartridges are installed
to compensate for any slight variations that might occur in cartridge
circumference.
DMAX is a density calibration of each print cartridge color at 100%
coverage; DHALF is also a density calibration of each print cartridge
color, but as a halftone instead of a full color. During halftone printing,
10 Chapter 2 Viewing product status from the HP EWS Information screens ENWW
To Next Page
Loading...
