Recommended action
98.00.01 or 98.00.02 or 98.00.03
1. Turn the product off and then on.
2. Use the Clean disk item in the Preboot menu.
3. Reload the firmware.
98.00.04
1. Turn the product off and then on.
2. Rerun the file erase function.
<Binname> full Remove all paper from bin
Description
The specified output bin is full.
Recommended action
Empty the bin to continue printing.
A second USB wireless networking accessory has been detected
Description
This message appears on the control panel when more than one USB wireless product is attached to the
product.
Recommended action
The use of more than one wireless USB product is not supported. Remove one of the wireless USB
products.
Bad optional tray connection
Description
The optional tray is not connected, not connected correctly, or a connection is not working correctly.
Recommended action
1. Turn the product off.
2. Remove and reinstall the optional tray.
3. Reconnect connectors for the tray.
4. Turn the product on.
222 Chapter 2 Solve problems ENWW
To Next Page
Loading...
