Recommended action
Print the job by using a product driver for a different print language, or add the requested language to
the product (if possible). To see a list of available personalities, print a configuration page.
Clean the rollers
Description
The product has reached the roller cleaning very low count. Clean the ADF rollers to maintain image
quality.
Recommended action
1. Open document feeder top cover.
2. Remove any visible lint or dust from the feed rollers and the separation pad using compressed air
or a clean lint-free cloth moistened with warm water.
3. Close the document feeder top cover.
4. On the product control panel, touch the Reset button.
Cleaning disk <X>% complete Do not power off
Description
A storage device is being sanitized or cleaned.
Recommended action
Do not turn off the product. The product's functions are unavailable. The product will automatically
restart when finished.
Close inner flap in duplexer
Description
The inner flap in the duplexer is open.
Recommended action
1. Open the lower right door.
2. Close the inner flap in the duplexer.
3. Close the door.
Close rear door
Description
The rear door is open.
ENWW
Tools for troubleshooting
225
To Next Page
Loading...
