Recommended action
1. Close the rear door.
2. If the error persists, verify the J8001 connectors is fully seated on the DC controller PCA.
3. Use the manual sensor test to verify the rear-door sensor functionality. If necessary, replace the
sensor (PS8001).
Close rear door Or touch OK to print to the rear bin
Description
The rear door is open.
Recommended action
1. Close the rear door, or touch the OK button to print to the rear bin.
2. If the error persists, verify the J8001 connectors is fully seated on the DC controller PCA.
3. Use the manual sensor test to verify the rear-door sensor functionality. If necessary, replace the
sensor (PS8001).
Close top cover
Description
The top cover is open.
Recommended action
1. Close the top cover.
2. Make sure that connectors FT1 and FT2 are fully seated on the cartridge door switch SW501.
3. Make sure that the tab on the cartridge door that activates the switch is not missing or damaged.
Replace the cartridge-door assembly if necessary.
4. Replace the door switch (SW501).
Data received
Description
The product is waiting for more data to continue the print job.
Recommended action
Touch the OK button to print the last page of the job. To print the existing data, touch the Print button.
Digital send communication error
Description
A digital send job failed and cannot be delivered.
226 Chapter 2 Solve problems ENWW
To Next Page
Loading...
