Recommended action
1. Open the top cover and remove the toner cartridge.
2. Pull the orange tab to remove the strip.
3. Remove the paper with the plastic insert.
4. Reinstall cartridge, and then close the top cover.
Remove the toner cartridge
Description
The product is component testing the belt.
Recommended action
◦
To perform the test, remove the toner cartridge.
◦
To cancel the test, touch the Stop button.
Replace Black Cartridge
Description
The black cartridge has reached the out condition.
Recommended action
Install a new toner cartridge.
Replace Document Feeder Kit
Description
The document feeder kit is very low.
Recommended action
Install a new document feeder roller assembly and a separation pad assembly.
Replace Fuser Kit
Description
The product indicates when the fuser kit is at its estimated end of life. The actual life remaining might be
different than the estimation. Have a replacement fuser kit available to install when print quality is no
longer acceptable.
The fuser kit does not need to be replaced now unless the print quality is no longer acceptable.
NOTE: After the fuser kit reaches its approximated end of life, the HP Premium Protection Warranty
on that fuser kit ends.
ENWW
Tools for troubleshooting
241
To Next Page
Loading...
